To reassign the WAN port to the LAN on the router (for example, the TP-Link WR841N router), you need to go to the router's web interface: Go in your browser to 192.168.0.1 (or 192.168.1.1 or whatever address you set earlier) Login and password are standard (indicated on a sticker under the router) If you failed to log in through any of the above addresses, you can reset the router settings to factory defaults. To do this, on the switched on router, hold down the RESET button (located near the WAN port) and hold it for 7-8 seconds, then release it and wait for the device to reboot. After the reset, the router's web interface will be available at one of the addresses written above. Once you get into the router's web interface, make sure once again that after resetting the equipment to factory settings, you do not have the Internet. Nothing has changed, so go to the "Network" - "IPTV" section Change the mode from “Automatic” to “Bridge” A drop-down menu wi...